FAST F-AW EXTRA BIALA is latex paint intended for painting walls and ceilings inside residential premises, including health care facilities, educational institutions and the food industry (without direct contact with food). It can be used on cement, cement-lime, gypsum, concrete surfaces, mineral and dispersion plasters, plasterboards, as well as paper and fiberglass wallpapers.
FAST F–AW EXTRA BIALA is an ecological paint produced on the basis of synthetic copolymers with the addition of fillers minerals and pigments. It has excellent covering properties and is resistant to washing. Coating made with paint FAST F-AW EXTRA BIALA is vapour permeable and low odor. Thanks to its properties, it provides rooms with pleasant microclimate. FAST F-AW EXTRA BIALA is snow-white and perfect for painting ceilings and walls.
bucket - 4 l
bucket - 10 l
Product's photo
The surface must be clean, dry, free of grease and dust. Scratches and defects must be repaired and filled. The paint should be applied on strong, compact surfaces. The surfaces to be painted should be thoroughly dusted and then washed with water. Walls painted with chalk and loose surfaces should be washed and then primed with FAST GRUNT G deeply penetrating concentrate. Drywall and absorbent surfaces based on gypsum or dolomite must be primed with FAST GRUNT U. The paint can be used on the following surfaces:
Before use, mix the contents of the package thoroughly. The paint should be applied in two layers, with a roller, spray or possibly with a brush. The ambient temperature during the works and during drying should be between +5°C and +25°C. Drying time approximately 2 hours. It is recommended to apply the next layers after at least 4 hours. Follow the general technique of painting with wall paints.
Parameters of airless spray based on the WAGNER - ProSpray 3.23 device
CAUTION
The paint coating acquires its full functional properties (scrub resistance/washability) after complete hardening, i.e. after 28 days from the end of painting.
synthetic copolymers with addition of fillers and pigments
The paint is to be stored and transported in tightly closed, original packaging at temperatures between +5°C and +25°C.
While working, avoid direct contact with the skin and protect the eyes. In case of contact with the eyes, rinse immediately with plenty of water and seek medical advice. Rinse soiled skin immediately with plenty of water.
Keep away from children.
This sheet replaces all previous versions.
